microphone

Ghanja420 · Registered User Joined: 20 Aug 2001 Posts: 97

whats the command to bind to speak through the mic

Lil-Yugi · Posted: Mon Apr 29, 2002 4:46 pm Post subject:

Bind x +voicerecord it think.

Ghanja420 · Registered User Joined: 20 Aug 2001 Posts: 97

I got the bind right and the little microphone comes up in thte right hand corner but no one can here me talking so is there somethign else i have to do,...

Snaggletooth · Guest

You have to make sure your send and recieve volumes are turned up in the customize section of the TFC loader.

MunkeyEye · Posted: Mon Apr 29, 2002 5:13 pm Post subject:

check your audio settings in your control panel, sometimes the mic is set to mute. If you're using a sound card like SB or something, check the application like Mixer and make sure it's not set to mute either.

Ghanja420 · Registered User Joined: 20 Aug 2001 Posts: 97

I did that also

Should there be anything else turned up all the way ..

ToRaK · Posted: Mon Apr 29, 2002 5:26 pm Post subject:

Make sure your mic is unmuted in C:\WINDOWS\SNDVOL32.EXE (running on most computers on startup)

Make sure your mic works outside of TFC first.

If your mic works outside of TFC but will not work inside it is possible that your sound card cannot receive sound and transmit audio.

ToRaK
_________________
The most hated.

Demented Avenger · Posted: Mon Apr 29, 2002 5:27 pm Post subject:

look in you tfc folder for a program that will help you set up voicecomm. I cant remember the name of it but you will know it when you see it.
_________________
I'm not as good as I once was, but I'm as good once as I ever was.